Before you start a simulation, here are some instructions to prepare the model correctly and get the best out of a simulation with Ingrid Cloud. These instructions apply for Wind Load, Wind Comfort and Wind Score applications.
The following videos display the same instructions showed in the text:
When the model is inserted inside the wind tunnel, Ingrid Cloud will find the lowest level of the geometry to set the point for the ground level. And the wind profile will interact with everything above that.
Wind Comfort and Wind Load applications simulate airflow in an urban environment, so objects can’t be floating. All geometries and buildings must be placed on the same level – unless topography is being modeled, see instructions ahead.
Models don’t need a bottom plate. Ingrid Cloud automatically creates a “floor" under the model before starting the simulation. But if your model contains a bottom plate with "zero thickness”, and covers approximately the same area as the rest of the model, it won’t be a problem, your simulation should work.
Remove small details. Features such as stairs have little influence on the results at the pedestrian level. The fewer the details, the faster your simulation will finish.
If your geometries contain balconies and you are interested in analysing Pedestrian Comfort and wind dynamics specifically in the balconies, contact us before starting a simulation.
Since we are analysing external wind flow behaviour, all openings must be closed. Please, shut all doors, windows or any other openings.
In Wind Comfort simulations, in order to better represent the flow near the area of interest, we recommend the inclusion of all surrounding buildings within a radius of at least 200 metres around the area you want to study.
Important note: Currently, the maximum model extension allowed is 1.2 km.
Ingrid Cloud supports 11 different file formats. The best file format to use is STL, because there’s virtually no limit for file size. For all the other supported formats, a maximum of 50 megabytes is recommended.
Create a slope connecting topography to the “ground level”
Keep in mind: the edges of the model cannot be too thick or too high so that it does not disrupt or influence the airflow. The best way to set up a model for a wind tunnel simulation is by preparing a slope underneath the topography. The slope will act as a smooth path for the wind flow, allowing turbulence to be correctly predicted around your area of interest.
Ingrid Cloud will take the lowest level of your geometry to automatically set the ground level. All structures modelled on top of your terrain should be contained within the slope or the terrain area.
We recommend the area covered by topography (and its slope) to be at most 20% larger than the area of interest. The maximum model extension allowed is 1.2 km.
Here are other relevant links and if you still have a question, click the button below to talk to our team of experts.